Forums Abandonware

Lankhor.net - Abw-Definition - Abw-Magazines - Abw-Videos - Abw annuaire
Nous sommes le 23-06-2017 09:04

Heures au format UTC+02:00




Poster un nouveau sujet  Répondre au sujet  [ 33 messages ]  Aller à la page 1 2 Suivante
Auteur Message
 Sujet du message : Problème d'envoi des messages
Message non luPosté : 01-02-2016 22:04 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Bonjour,

Je suis un peu en galère avec mon serveur car apparemment, il n'envoie pas correctement les mails, ce qui a pour conséquence que ceux-ci sont souvent rejetés par les serveurs.

Voici le genre de message que je reçois :
Citation :
From MAILER-DAEMON (Mail Delivery System)
To abandonw
Date Mon, 1 Feb 2016 22:00:23 +0100 (CET)
Subject Undelivered Mail Returned to Sender
Message text

This is the mail system at host abandonware.org.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster.

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

The mail system

<xxx@xxx.xx>: host xxx.xx[xxx.xxx.xxx.xxx] said: 504 5.5.2 <abandonw>:
Sender address rejected: need fully-qualified address (in reply to RCPT TO
command)


Est-ce que quelqu'un aurait une idée du problème ?
Merci d'avance.

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 01-02-2016 22:04 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Quelques infos sur mon serveur.

Citation :
IP principale : 94.23.35.89
Reverse : abandonware.org.
Service OVH : ns344347.ip-94-23-35.eu


Citation :
Nom d'hôte du système abandonware.org


Citation :
Domaine : abandonware.org
Login : abandonw


Citation :
Si je demande à redémarrer les services, tout est ok
httpd
named
proftpd
postfix
amavisd
network
opendkim
mysqld


contenu du fichier /etc/hostname
Citation :
abandonware.org


contenu du fichier /etc/hosts
Citation :
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
94.23.35.89 abandonware.org


Ce que j'obtiens en envoyant des commandes à mon serveur
Citation :
[root@abandonware ~]# hostname
abandonware.org
[root@abandonware ~]# hostname --fqdn
abandonware.org


contenu du fichier /etc/mailname
Citation :
abandonware.org


contenu du fichier /etc/postfix/transport
Citation :
# TRANSPORT(5)
autoreply.abandonware.org vacation:


contenu du fichier /etc/postfix/virtual
Citation :


contenu du fichier /var/log/maillog
Citation :
Feb 1 22:43:44 abandonware postfix/pickup[1678]: 944E927DDC: uid=507 from=<abandonw>
Feb 1 22:43:44 abandonware postfix/cleanup[5077]: 944E927DDC: message-id=<a483737f10ea4aac0e3ddfdc344a5827@forum.abandonware.org>
Feb 1 22:43:44 abandonware opendkim[1324]: 944E927DDC: DKIM-Signature field added (s=default, d=abandonware.org)
Feb 1 22:43:44 abandonware postfix/qmgr[1679]: 944E927DDC: from=<abandonw>, size=1602, nrcpt=1 (queue active)
Feb 1 22:43:44 abandonware postfix/pickup[1678]: A5C4C27DDB: uid=507 from=<abandonw>
Feb 1 22:43:44 abandonware postfix/cleanup[5077]: A5C4C27DDB: message-id=<ba8132d16c75ab4d95a1809f9f87b9d7@forum.abandonware.org>
Feb 1 22:43:44 abandonware opendkim[1324]: A5C4C27DDB: DKIM-Signature field added (s=default, d=abandonware.org)
Feb 1 22:43:44 abandonware postfix/smtp[5088]: 944E927DDC: to=<xxx@xxx.xx>, relay=xxx.xx[xxx.xxx.xxx.xxx]:25, delay=0.36, delays=0.12/0.01/0.02/0.22, dsn=5.5.2, status=bounced (host xxx.xx[xxx.xxx.xxx.xxx] said: 504 5.5.2 <abandonw>: Sender address rejected: need fully-qualified address (in reply to RCPT TO command))
Feb 1 22:43:44 abandonware postfix/cleanup[5090]: E202927E14: message-id=<20160201214344.E202927E14@abandonware.org>
Feb 1 22:43:45 abandonware postfix/qmgr[1679]: E202927E14: from=<>, size=3903, nrcpt=1 (queue active)
Feb 1 22:43:45 abandonware postfix/trivial-rewrite[5079]: warning: do not list domain abandonware.org in BOTH mydestination and virtual_alias_domains
Feb 1 22:43:45 abandonware postfix/trivial-rewrite[5079]: warning: do not list domain abandonware.org in BOTH mydestination and virtual_mailbox_domains
Feb 1 22:43:45 abandonware postfix/qmgr[1679]: A5C4C27DDB: from=<abandonw>, size=1604, nrcpt=1 (queue active)
Feb 1 22:43:45 abandonware dovecot: lda(abandonw): Error: user abandonw: Initialization failed: mail_location not set and autodetection failed: Mail storage autodetection failed with home=/home/abandonw
Feb 1 22:43:45 abandonware dovecot: lda(abandonw): Fatal: Invalid user settings. Refer to server log for more information.
Feb 1 22:43:45 abandonware postfix/bounce[5089]: 944E927DDC: sender non-delivery notification: E202927E14
Feb 1 22:43:45 abandonware postfix/qmgr[1679]: 944E927DDC: removed
Feb 1 22:43:45 abandonware postfix/local[5093]: E202927E14: to=<abandonw@abandonware.org>, orig_to=<abandonw>, relay=local, delay=0.44, delays=0.15/0.01/0/0.29, dsn=4.3.0, status=deferred (temporary failure)
Feb 1 22:43:45 abandonware dovecot: lda(fred@lankhor.net): sieve: msgid=<ba8132d16c75ab4d95a1809f9f87b9d7@forum.abandonware.org>: stored mail into mailbox 'INBOX'
Feb 1 22:43:45 abandonware dovecot: dict: mysql: Connected to localhost (mail)



Dans le fichier /etc/sysconfig/network
Citation :
NETWORKING=yes
GATEWAY=94.23.35.254
NOZEROCONF=true
HOSTNAME=abandonware.org

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 01-02-2016 22:04 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Voici le contenu du fichier /etc/postfix/main.cf
Citation :
# Global Postfix configuration file. This file lists only a subset
# of all parameters. For the syntax, and for a complete parameter
# list, see the postconf(5) manual page (command: "man 5 postconf").
#
# For common configuration examples, see BASIC_CONFIGURATION_README
# and STANDARD_CONFIGURATION_README. To find these documents, use
# the command "postconf html_directory readme_directory", or go to
# http://www.postfix.org/.
#
# For best results, change no more than 2-3 parameters at a time,
# and test if Postfix still works after every change.

# SOFT BOUNCE
#
# The soft_bounce parameter provides a limited safety net for
# testing. When soft_bounce is enabled, mail will remain queued that
# would otherwise bounce. This parameter disables locally-generated
# bounces, and prevents the SMTP server from rejecting mail permanently
# (by changing 5xx replies into 4xx replies). However, soft_bounce
# is no cure for address rewriting mistakes or mail routing mistakes.
#
#soft_bounce = no

# LOCAL PATHNAME INFORMATION
#
# The queue_directory specifies the location of the Postfix queue.
# This is also the root directory of Postfix daemons that run chrooted.
# See the files in examples/chroot-setup for setting up Postfix chroot
# environments on different UNIX systems.
#

# The command_directory parameter specifies the location of all
# postXXX commands.
#
command_directory = /usr/sbin

# The daemon_directory parameter specifies the location of all Postfix
# daemon programs (i.e. programs listed in the master.cf file). This
# directory must be owned by root.
#
daemon_directory = /usr/libexec/postfix

# The data_directory parameter specifies the location of Postfix-writable
# data files (caches, random numbers). This directory must be owned
# by the mail_owner account (see below).
#
data_directory = /var/lib/postfix

# QUEUE AND PROCESS OWNERSHIP
#
# The mail_owner parameter specifies the owner of the Postfix queue
# and of most Postfix daemon processes. Specify the name of a user
# account THAT DOES NOT SHARE ITS USER OR GROUP ID WITH OTHER ACCOUNTS
# AND THAT OWNS NO OTHER FILES OR PROCESSES ON THE SYSTEM. In
# particular, don't specify nobody or daemon. PLEASE USE A DEDICATED
# USER.
#

# The default_privs parameter specifies the default rights used by
# the local delivery agent for delivery to external file or command.
# These rights are used in the absence of a recipient user context.
# DO NOT SPECIFY A PRIVILEGED USER OR THE POSTFIX OWNER.
#
#default_privs = nobody

# INTERNET HOST AND DOMAIN NAMES
#
# The myhostname parameter specifies the internet hostname of this
# mail system. The default is to use the fully-qualified domain name
# from gethostname(). $myhostname is used as a default value for many
# other configuration parameters.
#
myhostname = abandonware.org

# The mydomain parameter specifies the local internet domain name.
# The default is to use $myhostname minus the first component.
# $mydomain is used as a default value for many other configuration
# parameters.
#
mydomain = localdomain

# SENDING MAIL
#
# The myorigin parameter specifies the domain that locally-posted
# mail appears to come from. The default is to append $myhostname,
# which is fine for small sites. If you run a domain with multiple
# machines, you should (1) change this to $mydomain and (2) set up
# a domain-wide alias database that aliases each user to
# user@that.users.mailhost.
#
# For the sake of consistency between sender and recipient addresses,
# myorigin also specifies the default domain name that is appended
# to recipient addresses that have no @domain part.
#
myorigin = $myhostname
#myorigin = $mydomain

# RECEIVING MAIL

# The inet_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on. By default,
# the software claims all active interfaces on the machine. The
# parameter also controls delivery of mail to user@[ip.address].
#
# See also the proxy_interfaces parameter, for network addresses that
# are forwarded to us via a proxy or network address translator.
#
# Note: you need to stop/start Postfix when this parameter changes.
#
#inet_interfaces = $myhostname
#inet_interfaces = $myhostname, localhost
#inet_interfaces = localhost

# Enable IPv4, and IPv6 if supported
inet_protocols = ipv4

# The proxy_interfaces parameter specifies the network interface
# addresses that this mail system receives mail on by way of a
# proxy or network address translation unit. This setting extends
# the address list specified with the inet_interfaces parameter.
#
# You must specify your proxy/NAT addresses when your system is a
# backup MX host for other domains, otherwise mail delivery loops
# will happen when the primary MX host is down.
#
#proxy_interfaces =
#proxy_interfaces = 1.2.3.4

# The mydestination parameter specifies the list of domains that this
# machine considers itself the final destination for.
#
# These domains are routed to the delivery agent specified with the
# local_transport parameter setting. By default, that is the UNIX
# compatible delivery agent that lookups all recipients in /etc/passwd
# and /etc/aliases or their equivalent.
#
# The default is $myhostname + localhost.$mydomain. On a mail domain
# gateway, you should also include $mydomain.
#
# Do not specify the names of virtual domains - those domains are
# specified elsewhere (see VIRTUAL_README).
#
# Do not specify the names of domains that this machine is backup MX
# host for. Specify those names via the relay_domains settings for
# the SMTP server, or use permit_mx_backup if you are lazy (see
# STANDARD_CONFIGURATION_README).
#
# The local machine is always the final destination for mail addressed
# to user@[the.net.work.address] of an interface that the mail system
# receives mail on (see the inet_interfaces parameter).
#
# Specify a list of host or domain names, /file/name or type:table
# patterns, separated by commas and/or whitespace. A /file/name
# pattern is replaced by its contents; a type:table is matched when
# a name matches a lookup key (the right-hand side is ignored).
# Continue long lines by starting the next line with whitespace.
#
# See also below, section "REJECTING MAIL FOR UNKNOWN LOCAL USERS".
#
#mydestination = localhost.$mydomain, localhost, localhost.localdomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain
#mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain,
# mail.$mydomain, http://www.$mydomain, ftp.$mydomain
mydestination = localhost.$mydomain, localhost, localhost.localdomain, $myhostname, $mydomain, mail.$mydomain, http://www.$mydomain, ftp.$mydomain




# REJECTING MAIL FOR UNKNOWN LOCAL USERS
#
# The local_recipient_maps parameter specifies optional lookup tables
# with all names or addresses of users that are local with respect
# to $mydestination, $inet_interfaces or $proxy_interfaces.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown local users. This parameter is defined by default.
#
# To turn off local recipient checking in the SMTP server, specify
# local_recipient_maps = (i.e. empty).
#
# The default setting assumes that you use the default Postfix local
# delivery agent for local delivery. You need to update the
# local_recipient_maps setting if:
#
# - You define $mydestination domain recipients in files other than
# /etc/passwd, /etc/aliases, or the $virtual_alias_maps files.
# For example, you define $mydestination domain recipients in
# the $virtual_mailbox_maps files.
#
# - You redefine the local delivery agent in master.cf.
#
# - You redefine the "local_transport" setting in main.cf.
#
# - You use the "luser_relay", "mailbox_transport", or "fallback_transport"
# feature of the Postfix local delivery agent (see local(8)).
#
# Details are described in the LOCAL_RECIPIENT_README file.
#
# Beware: if the Postfix SMTP server runs chrooted, you probably have
# to access the passwd file via the proxymap service, in order to
# overcome chroot restrictions. The alternative, having a copy of
# the system passwd file in the chroot jail is just not practical.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify a bare username, an @domain.tld
# wild-card, or specify a user@domain.tld address.
#
#local_recipient_maps = unix:passwd.byname $alias_maps
#local_recipient_maps = proxy:unix:passwd.byname $alias_maps
local_recipient_maps = unix:passwd.byname

# The unknown_local_recipient_reject_code specifies the SMTP server
# response code when a recipient domain matches $mydestination or
# ${proxy,inet}_interfaces, while $local_recipient_maps is non-empty
# and the recipient address or address local-part is not found.
#
# The default setting is 550 (reject mail) but it is safer to start
# with 450 (try again later) until you are certain that your
# local_recipient_maps settings are OK.
#
unknown_local_recipient_reject_code = 550

# TRUST AND RELAY CONTROL

# The mynetworks parameter specifies the list of "trusted" SMTP
# clients that have more privileges than "strangers".
#
# In particular, "trusted" SMTP clients are allowed to relay mail
# through Postfix. See the smtpd_recipient_restrictions parameter
# in postconf(5).
#
# You can specify the list of "trusted" network addresses by hand
# or you can let Postfix do it for you (which is the default).
#
# By default (mynetworks_style = subnet), Postfix "trusts" SMTP
# clients in the same IP subnetworks as the local machine.
# On Linux, this does works correctly only with interfaces specified
# with the "ifconfig" command.
#
# Specify "mynetworks_style = class" when Postfix should "trust" SMTP
# clients in the same IP class A/B/C networks as the local machine.
# Don't do this with a dialup site - it would cause Postfix to "trust"
# your entire provider's network. Instead, specify an explicit
# mynetworks list by hand, as described below.
#
# Specify "mynetworks_style = host" when Postfix should "trust"
# only the local machine.
#
#mynetworks_style = class
#mynetworks_style = subnet
#mynetworks_style = host

# Alternatively, you can specify the mynetworks list by hand, in
# which case Postfix ignores the mynetworks_style setting.
#
# Specify an explicit list of network/netmask patterns, where the
# mask specifies the number of bits in the network part of a host
# address.
#
# You can also specify the absolute pathname of a pattern file instead
# of listing the patterns here. Specify type:table for table-based lookups
# (the value on the table right-hand side is not used).
#
mynetworks = 127.0.0.0/8
#mynetworks = $config_directory/mynetworks
#mynetworks = hash:/etc/postfix/network_table

# The relay_domains parameter restricts what destinations this system will
# relay mail to. See the smtpd_recipient_restrictions description in
# postconf(5) for detailed information.
#
# By default, Postfix relays mail
# - from "trusted" clients (IP address matches $mynetworks) to any destination,
# - from "untrusted" clients to destinations that match $relay_domains or
# subdomains thereof, except addresses with sender-specified routing.
# The default relay_domains value is $mydestination.
#
# In addition to the above, the Postfix SMTP server by default accepts mail
# that Postfix is final destination for:
# - destinations that match $inet_interfaces or $proxy_interfaces,
# - destinations that match $mydestination
# - destinations that match $virtual_alias_domains,
# - destinations that match $virtual_mailbox_domains.
# These destinations do not need to be listed in $relay_domains.
#
# Specify a list of hosts or domains, /file/name patterns or type:name
# lookup tables, separated by commas and/or whitespace. Continue
# long lines by starting the next line with whitespace. A file name
# is replaced by its contents; a type:name table is matched when a
# (parent) domain appears as lookup key.
#
# NOTE: Postfix will not automatically forward mail for domains that
# list this system as their primary or backup MX host. See the
# permit_mx_backup restriction description in postconf(5).
#
#relay_domains = list.localhost, list.localhost.localdomain
#transport_maps = hash:/etc/postfix/transport
#mailman_destination_recipient_limit = 1
# INTERNET OR INTRANET

# The relayhost parameter specifies the default host to send mail to
# when no entry is matched in the optional transport(5) table. When
# no relayhost is given, mail is routed directly to the destination.
#
# On an intranet, specify the organizational domain name. If your
# internal DNS uses no MX records, specify the name of the intranet
# gateway host instead.
#
# In the case of SMTP, specify a domain, host, host:port, [host]:port,
# [address] or [address]:port; the form [host] turns off MX lookups.
#
# If you're connected via UUCP, see also the default_transport parameter.
#
#relayhost = $mydomain
#relayhost = [gateway.my.domain]
#relayhost = [mailserver.isp.tld]
#relayhost = uucphost
#relayhost = [an.ip.add.ress]

# REJECTING UNKNOWN RELAY USERS
#
# The relay_recipient_maps parameter specifies optional lookup tables
# with all addresses in the domains that match $relay_domains.
#
# If this parameter is defined, then the SMTP server will reject
# mail for unknown relay users. This feature is off by default.
#
# The right-hand side of the lookup tables is conveniently ignored.
# In the left-hand side, specify an @domain.tld wild-card, or specify
# a user@domain.tld address.
#
#relay_recipient_maps = hash:/etc/postfix/relay_recipients

# INPUT RATE CONTROL
#
# The in_flow_delay configuration parameter implements mail input
# flow control. This feature is turned on by default, although it
# still needs further development (it's disabled on SCO UNIX due
# to an SCO bug).
#
# A Postfix process will pause for $in_flow_delay seconds before
# accepting a new message, when the message arrival rate exceeds the
# message delivery rate. With the default 100 SMTP server process
# limit, this limits the mail inflow to 100 messages a second more
# than the number of messages delivered per second.
#
# Specify 0 to disable the feature. Valid delays are 0..10.
#
#in_flow_delay = 1s

# ADDRESS REWRITING
#
# The ADDRESS_REWRITING_README document gives information about
# address masquerading or other forms of address rewriting including
# username->Firstname.Lastname mapping.

# ADDRESS REDIRECTION (VIRTUAL DOMAIN)
#
# The VIRTUAL_README document gives information about the many forms
# of domain hosting that Postfix supports.

# "USER HAS MOVED" BOUNCE MESSAGES
#
# See the discussion in the ADDRESS_REWRITING_README document.

# TRANSPORT MAP
#
# See the discussion in the ADDRESS_REWRITING_README document.

# ALIAS DATABASE
#
# The alias_maps parameter specifies the list of alias databases used
# by the local delivery agent. The default list is system dependent.
#
# On systems with NIS, the default is to search the local alias
# database, then the NIS alias database. See aliases(5) for syntax
# details.
#
# If you change the alias database, run "postalias /etc/aliases" (or
# wherever your system stores the mail alias file), or simply run
# "newaliases" to build the necessary DBM or DB file.
#
# It will take a minute or so before changes become visible. Use
# "postfix reload" to eliminate the delay.
#
alias_maps = hash:/etc/aliases, hash:/etc/mailman/aliases
#alias_maps = hash:/etc/aliases, nis:mail.aliases
#alias_maps = netinfo:/aliases

# The alias_database parameter specifies the alias database(s) that
# are built with "newaliases" or "sendmail -bi". This is a separate
# configuration parameter, because alias_maps (see above) may specify
# tables that are not necessarily all under control by Postfix.
#
alias_database = hash:/etc/aliases, hash:/etc/mailman/aliases

#alias_database = dbm:/etc/mail/aliases
#alias_database = hash:/etc/aliases, hash:/opt/majordomo/aliases
# ADDRESS EXTENSIONS (e.g., user+foo)
#
# The recipient_delimiter parameter specifies the separator between
# user names and address extensions (user+foo). See canonical(5),
# local(8), relocated(5) and virtual(5) for the effects this has on
# aliases, canonical, virtual, relocated and .forward file lookups.
# Basically, the software tries user+foo and .forward+foo before
# trying user and .forward.
#
recipient_delimiter = +

# DELIVERY TO MAILBOX
#
# The home_mailbox parameter specifies the optional pathname of a
# mailbox file relative to a user's home directory. The default
# mailbox file is /var/spool/mail/user or /var/mail/user. Specify
# "Maildir/" for qmail-style delivery (the / is required).
#
#home_mailbox = Mailbox
#home_mailbox = Maildir/

# The mail_spool_directory parameter specifies the directory where
# UNIX-style mailboxes are kept. The default setting depends on the
# system type.
#
#mail_spool_directory = /var/mail
#mail_spool_directory = /var/spool/mail

# The mailbox_command parameter specifies the optional external
# command to use instead of mailbox delivery. The command is run as
# the recipient with proper HOME, SHELL and LOGNAME environment settings.
# Exception: delivery for root is done as $default_user.
#
# Other environment variables of interest: USER (recipient username),
# EXTENSION (address extension), DOMAIN (domain part of address),
# and LOCAL (the address localpart).
#
# Unlike other Postfix configuration parameters, the mailbox_command
# parameter is not subjected to $parameter substitutions. This is to
# make it easier to specify shell syntax (see example below).
#
# Avoid shell meta characters because they will force Postfix to run
# an expensive shell process. Procmail alone is expensive enough.
#
# IF YOU USE THIS TO DELIVER MAIL SYSTEM-WIDE, YOU MUST SET UP AN
# ALIAS THAT FORWARDS MAIL FOR ROOT TO A REAL USER.
#
#mailbox_command = /usr/lib/dovecot/deliver -n -m "$EXTENSION"
#mailbox_command = /some/where/procmail -a "$EXTENSION"

# The mailbox_transport specifies the optional transport in master.cf
# to use after processing aliases and .forward files. This parameter
# has precedence over the mailbox_command, fallback_transport and
# luser_relay parameters.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp

# If using the cyrus-imapd IMAP server deliver local mail to the IMAP
# server using LMTP (Local Mail Transport Protocol), this is prefered
# over the older cyrus deliver program by setting the
# mailbox_transport as below:
#
# mailbox_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#
# The efficiency of LMTP delivery for cyrus-imapd can be enhanced via
# these settings.
#
# local_destination_recipient_limit = 300
# local_destination_concurrency_limit = 5
#
# Of course you should adjust these settings as appropriate for the
# capacity of the hardware you are using. The recipient limit setting
# can be used to take advantage of the single instance message store
# capability of Cyrus. The concurrency limit can be used to control
# how many simultaneous LMTP sessions will be permitted to the Cyrus
# message store.
#
# To use the old cyrus deliver program you have to set:
#mailbox_transport = local

# The fallback_transport specifies the optional transport in master.cf
# to use for recipients that are not found in the UNIX passwd database.
# This parameter has precedence over the luser_relay parameter.
#
# Specify a string of the form transport:nexthop, where transport is
# the name of a mail delivery transport defined in master.cf. The
# :nexthop part is optional. For more details see the sample transport
# configuration file.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must update the "local_recipient_maps" setting in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#fallback_transport = lmtp:unix:/var/lib/imap/socket/lmtp
#fallback_transport =

# The luser_relay parameter specifies an optional destination address
# for unknown recipients. By default, mail for unknown@$mydestination,
# unknown@[$inet_interfaces] or unknown@[$proxy_interfaces] is returned
# as undeliverable.
#
# The following expansions are done on luser_relay: $user (recipient
# username), $shell (recipient shell), $home (recipient home directory),
# $recipient (full recipient address), $extension (recipient address
# extension), $domain (recipient domain), $local (entire recipient
# localpart), $recipient_delimiter. Specify ${name?value} or
# ${name:value} to expand value only when $name does (does not) exist.
#
# luser_relay works only for the default Postfix local delivery agent.
#
# NOTE: if you use this feature for accounts not in the UNIX password
# file, then you must specify "local_recipient_maps =" (i.e. empty) in
# the main.cf file, otherwise the SMTP server will reject mail for
# non-UNIX accounts with "User unknown in local recipient table".
#
#luser_relay = $user@other.host
#luser_relay = $local@other.host
#luser_relay = admin+$local

# JUNK MAIL CONTROLS
#
# The controls listed here are only a very small subset. The file
# SMTPD_ACCESS_README provides an overview.

# The header_checks parameter specifies an optional table with patterns
# that each logical message header is matched against, including
# headers that span multiple physical lines.
#
# By default, these patterns also apply to MIME headers and to the
# headers of attached messages. With older Postfix versions, MIME and
# attached message headers were treated as body text.
#
# For details, see "man header_checks".
#
#header_checks = regexp:/etc/postfix/header_checks

# FAST ETRN SERVICE
#
# Postfix maintains per-destination logfiles with information about
# deferred mail, so that mail can be flushed quickly with the SMTP
# "ETRN domain.tld" command, or by executing "sendmail -qRdomain.tld".
# See the ETRN_README document for a detailed description.
#
# The fast_flush_domains parameter controls what destinations are
# eligible for this service. By default, they are all domains that
# this server is willing to relay mail to.
#
#fast_flush_domains = $relay_domains

# SHOW SOFTWARE VERSION OR NOT
#
# The smtpd_banner parameter specifies the text that follows the 220
# code in the SMTP server's greeting banner. Some people like to see
# the mail version advertised. By default, Postfix shows no version.
#
# You MUST specify $myhostname at the start of the text. That is an
# RFC requirement. Postfix itself does not care.
#
#smtpd_banner = $myhostname ESMTP $mail_name
#smtpd_banner = $myhostname ESMTP $mail_name ($mail_version)

# PARALLEL DELIVERY TO THE SAME DESTINATION
#
# How many parallel deliveries to the same user or domain? With local
# delivery, it does not make sense to do massively parallel delivery
# to the same user, because mailbox updates must happen sequentially,
# and expensive pipelines in .forward files can cause disasters when
# too many are run at the same time. With SMTP deliveries, 10
# simultaneous connections to the same domain could be sufficient to
# raise eyebrows.
#
# Each message delivery transport has its XXX_destination_concurrency_limit
# parameter. The default is $default_destination_concurrency_limit for
# most delivery transports. For the local delivery agent the default is 2.

#local_destination_concurrency_limit = 2
#default_destination_concurrency_limit = 20

# DEBUGGING CONTROL
#
# The debug_peer_level parameter specifies the increment in verbose
# logging level when an SMTP client or server host name or address
# matches a pattern in the debug_peer_list parameter.
#
debug_peer_level = 2

# The debug_peer_list parameter specifies an optional list of domain
# or network patterns, /file/name patterns or type:name tables. When
# an SMTP client or server host name or address matches a pattern,
# increase the verbose logging level by the amount specified in the
# debug_peer_level parameter.
#
#debug_peer_list = 127.0.0.1
#debug_peer_list = some.domain

# The debugger_command specifies the external command that is executed
# when a Postfix daemon program is run with the -D option.
#
# Use "command .. & sleep 5" so that the debugger can attach before
# the process marches on. If you use an X-based debugger, be sure to
# set up your XAUTHORITY environment variable before starting Postfix.
#
debugger_command =
PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin
ddd $daemon_directory/$process_name $process_id & sleep 5

# If you can't use X, use this to capture the call stack when a
# daemon crashes. The result is in a file in the configuration
# directory, and is named after the process name and the process ID.
#
# debugger_command =
# PATH=/bin:/usr/bin:/usr/local/bin; export PATH; (echo cont;
# echo where) | gdb $daemon_directory/$process_name $process_id 2>&1
# >$config_directory/$process_name.$process_id.log & sleep 5
#
# Another possibility is to run gdb under a detached screen session.
# To attach to the screen sesssion, su root and run "screen -r
# <id_string>" where <id_string> uniquely matches one of the detached
# sessions (from "screen -list").
#
# debugger_command =
# PATH=/bin:/usr/bin:/sbin:/usr/sbin; export PATH; screen
# -dmS $process_name gdb $daemon_directory/$process_name
# $process_id & sleep 1

# INSTALL-TIME CONFIGURATION INFORMATION
#
# The following parameters are used when installing a new Postfix version.
#
# sendmail_path: The full pathname of the Postfix sendmail command.
# This is the Sendmail-compatible mail posting interface.
#
sendmail_path = /usr/sbin/sendmail.postfix

# newaliases_path: The full pathname of the Postfix newaliases command.
# This is the Sendmail-compatible command to build alias databases.
#
newaliases_path = /usr/bin/newaliases.postfix

# mailq_path: The full pathname of the Postfix mailq command. This
# is the Sendmail-compatible mail queue listing command.
#
mailq_path = /usr/bin/mailq.postfix

# setgid_group: The group for mail submission and queue management
# commands. This must be a group name with a numerical group ID that
# is not shared with other accounts, not even with the Postfix account.
#
setgid_group = postdrop

# html_directory: The location of the Postfix HTML documentation.
#
html_directory = no

# manpage_directory: The location of the Postfix on-line manual pages.
#
manpage_directory = /usr/share/man

# sample_directory: The location of the Postfix sample configuration files.
# This parameter is obsolete as of Postfix 2.1.
#
sample_directory = /usr/share/doc/postfix-2.6.6/samples

# readme_directory: The location of the Postfix README files.
#
readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES

#smtpd_sasl_type = dovecot
#smtpd_sasl_auth_enable = yes
#smtpd_sasl_path = /var/spool/postfix/private/auth
#smtpd_recipient_restrictions=permit_sasl_authenticated, permit_mynetworks, check_relay_domains
smtpd_recipient_restrictions=check_recipient_access mysql:/etc/postfix/sql/mysql_amavis_in.cf, permit_mynetworks, reject_unauth_destination
external_submission_restrictions=check_recipient_access mysql:/etc/postfix/sql/mysql_amavis_in.cf, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination

virtual_mailbox_domains = mysql:/etc/postfix/sql/mysql_virtual_domains_maps.cf
virtual_mailbox_maps = mysql:/etc/postfix/sql/mysql_virtual_mailbox_maps.cf, mysql:/etc/postfix/sql/mysql_virtual_alias_domain_mailbox_maps.cf
virtual_alias_maps = mysql:/etc/postfix/sql/mysql_virtual_alias_maps.cf, mysql:/etc/postfix/sql/mysql_virtual_alias_domain_maps.cf, mysql:/etc/postfix/sql/mysql_virtual_alias_domain_catchall_maps.cf, mysql:/etc/postfix/sql/mysql_virtual_mailing.cf
virtual_mailbox_base = /var/mail/vhosts
virtual_uid_maps = static:500
virtual_gid_maps = static:101
virtual_transport = dovecot

virtual_create_maildirsize = yes
virtual_mailbox_extended = yes
virtual_mailbox_limit_maps = mysql:/etc/postfix/sql/mysql_virtual_mailbox_limit_maps.cf
virtual_mailbox_limit_override = yes
virtual_maildir_limit_message = Sorry, the user's maildir has overdrawn his diskspace quota, please try again later.
virtual_overquota_bounce = yes
transport_maps = hash:/etc/postfix/transport
#
# translate sender root to postmaster@abandonware.org
#
sender_canonical_maps=hash:/etc/postfix/sender_canonical

#
# multiple recipients (to dovecot) in one mail won't work if not activated!
#
dovecot_destination_recipient_limit = 1

#
# OpenDKIM
#
smtpd_milters = inet:localhost:8891
non_smtpd_milters = inet:localhost:8891
milter_default_action = accept

#
# TLS
#
smtpd_tls_security_level = may
smtpd_tls_key_file = /etc/pki/tls/private/localhost.key
smtpd_tls_cert_file = /etc/pki/tls/certs/localhost.crt
smtpd_tls_loglevel = 1
smtpd_tls_session_cache_timeout = 3600s
smtpd_tls_session_cache_database = btree:/var/lib/postfix/smtpd_tls_cache.db
smtpd_tls_auth_only = yes
tls_random_source = dev:/dev/urandom

#
# dovecot
#
mailbox_command = /usr/libexec/dovecot/deliver

# AJOUT DE FRED
virtual_alias_domains = abandonware.org
virtual_alias_maps = mysql:/etc/postfix/sql/mysql_virtual_alias_maps.cf, mysql:/etc/postfix/sql/mysql_virtual_alias_domain_maps.cf, mysql:/etc/postfix/sql/mysql_virtual_alias_domain_catchall_maps.cf, mysql:/etc/postfix/sql/mysql_virtual_mailing.cf

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 01-02-2016 22:58 
Hors ligne
Blademaster

Enregistré le : 22-01-2016 17:33
Messages : 17
Fredo_L a écrit :
Citation :
From MAILER-DAEMON (Mail Delivery System)
To abandonw



Tu as tronqué le "To abandonw" ? Car c'est aussi ce qui gêne les autres serveurs, le nom de l'expéditeur (ici devenu destinataire du mail d'erreur) est incomplet. C'est peut-être pour ça que le mail du mailder daemon n'arrive pas et reste dans la queue, car le destinataire est incompréhensible...

Donc il faudrait comprendre pourquoi ton serveur envoie des mails avec "abandonw" comme expéditeur. C'est peut-être pas postfix directement ? Comment envoies-tu tes mails de tests, avec PHP ? Si oui, essaye de regarder dans ton php.ini s'il y a des infos sur la façon dont les mails sont envoyés... (en particulier les lignes default_domain, force_sender, ou hostname)


Haut
   
Message non luPosté : 01-02-2016 23:10 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Pour faire mes tests, j'utilise effectivement la fonction mail de php.

Je m'envoie soit les mails depuis le forum phpBB : memberlist.php?mode=email&u=6071

Voici l'entête du mail envoyé :
Citation :
Return-Path: <abandonw>
Delivered-To: fred@lankhor.net
Received: by abandonware.org (Postfix, from userid 507)
id A5C4C27DDB; Mon, 1 Feb 2016 22:43:44 +0100 (CET)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=abandonware.org;
s=default; t=1454363024;
bh=OrCp+p9Def3Z82+NJmyUy45KEqIuiPEhFFUmt50ir0U=;
h=To:Subject:From:Reply-To:Date;
b=V0JnwXowyKLzLdYmq0RR7qVqG/Ktw7mUkW7SkclAzF8QukyPseN20Ond/8kp+sKzw
z4kwegc9rtesmSMb0uwQZKXmT1STqKaZSVzxfar0MOhZg5MJ797cKktZODOsb1XiEx
uYiG8nGysYiqyDf2IC9XzwE+c1HlanBdAHIVQUdc=
To: =?UTF-8?B?RnJlZG9fTA==?= <fred@lankhor.net>
Subject: =?UTF-8?B?YWFhYWFhYWFhYWFhYWE=?=
X-PHP-Originating-Script: 507:functions_messenger.php
From: "=?UTF-8?B?Rm9ydW0gQWJhbmRvbndhcmUub3Jn?=" <noreply@abandonware.org>
Reply-To: fred@lankhor.net
Sender: <noreply@abandonware.org>
MIME-Version: 1.0
Message-ID: <ba8132d16c75ab4d95a1809f9f87b9d7@forum.abandonware.org>
Date: Mon, 01 Feb 2016 22:43:44 +0100
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: phpBB3
X-MimeOLE: phpBB3
X-phpBB-Origin: phpbb://forum.abandonware.org
X-AntiAbuse: Board servername - forum.abandonware.org
X-AntiAbuse: User IP - 89.156.114.166
X-AntiAbuse: User_id - 2300
X-AntiAbuse: Username - Fredo_L



*****************************

soit depuis une page de mon site lankhor.net : http://www.lankhor.net/sendcard/index.php

Voici l'entête du mail envoyé :
Citation :
Return-Path: <lankhor>
Delivered-To: fred@lankhor.net
Received: by abandonware.org (Postfix, from userid 509)
id 8876027DDC; Mon, 1 Feb 2016 23:06:07 +0100 (CET)
To: fred@lankhor.net
Subject: bbbbbbb vous a envoyé une carte virtuelle
X-PHP-Originating-Script: 509:sendcard.php
From: xxx@xxx.xx
X-Mailer:sendcard 3.02 - PHP/5.3.3
Message-Id: <20160201220607.8876027DDC@abandonware.org>
Date: Mon, 1 Feb 2016 23:06:07 +0100 (CET)


Je regarde ma configuration de php

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 01-02-2016 23:16 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Le contenu partiel de /etc/php.ini est le suivant :
Citation :
[mail function]
; For Win32 only.
; http://www.php.net/manual/en/mail.confi ... p#ini.smtp
SMTP = localhost
; http://www.php.net/manual/en/mail.confi ... .smtp-port
smtp_port = 25

; For Win32 only.
; http://www.php.net/manual/en/mail.confi ... dmail-from
;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://www.php.net/manual/en/mail.confi ... dmail-path
sendmail_path = /usr/sbin/sendmail -t -i

; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =

; Add X-PHP-Originaiting-Script: that will include uid of the script followed by the filename
mail.add_x_header = On

; Log all mail() calls including the full path of the script, line #, to address and headers
;mail.log =

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 01-02-2016 23:17 
Hors ligne
Blademaster

Enregistré le : 22-01-2016 17:33
Messages : 17
Les "Return-Path" sont bizarres ici aussi, il manque à nouveau le domaine... donc il y a bien un souci quelque part. Je commence à croire que c'est PHP le coupable. Je pensais que tu envoyais des mails de tests directement en SSH sur le serveur, genre :

Code :
echo test | mail -s test adresse@detest.com


Haut
   
Message non luPosté : 01-02-2016 23:19 
Hors ligne
Blademaster

Enregistré le : 22-01-2016 17:33
Messages : 17
Tu peux tester un envoi en ligne de commande à l'adresse de test que je t'avais donné par mail ? Juste pour isoler le souci entre PHP et Postfix ?


Haut
   
Message non luPosté : 01-02-2016 23:27 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Quand j'envoie en ligne de commande, je reçois bien les mails.

Ce qui n'est pas bon, c'est que cela m'est envoyé par root <postmaster@serveur2.letxxx.org> alors que cela devrait être à présent postmaster@abandonware.org

L'entête est le suivant :
Citation :
Return-Path: <postmaster@serveur2.letexxx.org>
Delivered-To: fred@lankhor.net
Received: from localhost (HELO queue) (127.0.0.1)
by localhost with SMTP; 2 Feb 2016 00:07:07 +0200
Received: from localhost (HELO mail478.ha.ovh.net) (127.0.0.1)
by localhost with SMTP; 2 Feb 2016 00:07:07 +0200
Received: from localhost (HELO queueout) (127.0.0.1)
by localhost with SMTP; 2 Feb 2016 00:07:07 +0200
Delivered-To: lankhor.net-fred@lankhor.net
Received: from localhost (HELO queue) (127.0.0.1)
by localhost with SMTP; 2 Feb 2016 00:07:07 +0200
Received: from vesta.mwyann.net (HELO vesta) (176.31.150.102)
by mx0.ovh.net with AES256-GCM-SHA384 encrypted SMTP; 2 Feb 2016 00:07:04 +0200
Received: from abandonware.org (abandonware.org [94.23.35.89])
by vesta (Postfix) with ESMTP id B444B60832
for <xxx@xxx.xx>; Mon, 1 Feb 2016 23:07:04 +0100 (CET)
Received: by abandonware.org (Postfix, from userid 0)
id 2F56727DDC; Mon, 1 Feb 2016 23:21:01 +0100 (CET)
Date: Mon, 01 Feb 2016 23:21:01 +0100
To: xxx@xxx.xx
Subject: test
User-Agent: Heirloom mailx 12.4 7/29/08
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-Id: <20160201222101.2F56727DDC@abandonware.org>
From: postmaster@serveur2.letexxx.org (root)
X-Ovh-Tracer-Id: 15494634518989199015
X-Ovh-Remote: xxx.xxx.xxx.xxxx (xxxx.xxx.net)
X-Ovh-Local: 213.186.33.32 (mx0.ovh.net)
X-OVH-SPAMSTATE: OK
X-OVH-SPAMSCORE: 0
X-OVH-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrfeekjedrudduucetufdoteggodftvfcurfhrohhfihhlvgemucfqggfjnecuuegrihhlohhuthemuceftddtnecu

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 01-02-2016 23:32 
Hors ligne
Blademaster

Enregistré le : 22-01-2016 17:33
Messages : 17
Fredo_L a écrit :
Quand j'envoie en ligne de commande, je reçois bien les mails.

Ce qui n'est pas bon, c'est que cela m'est envoyé par root <postmaster@serveur2.letxxx.org> alors que cela devrait être à présent postmaster@abandonware.org


Le nom du serveur n'est utilisé que par défaut, normalement tu le spécifies mais là en ligne de commande on a tout laissé par défaut pour éviter de brouiller les pistes. Donc c'est pas gênant en soi. Si tu as fait le changement de hostname récemment, genre si tu n'as pas rebooté depuis, il faudrait essayer un petit reboot si tu veux vraiment que ce soit propre :) (un changement de hostname ça le mérite bien).

Du coup on sait que c'est pas Postfix, et PHP n'a pas l'air d'avoir de souci non plus d'après ton php.ini... du coup il faudrait vérifier la config de phpbb, et vérifier s'il y a une configuration de l'adresse expéditeur quelque part.


Haut
   
Message non luPosté : 01-02-2016 23:47 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Je viens de faire un reboot du serveur.
Quand je me connecte dessus, j'ai :
Citation :
CentOS release 6.7 (Final)
Linux abandonware.org 3.14.32-xxxx-grs-ipv6-64 #6 SMP Wed Jan 20 17:52:44 CET 2016 x86_64 x86_64 x86_64 GNU/Linux

hostname : abandonware.org
eth0 IPv4 : 94.23.35.89


Cependant, si je m'envoie un mail, j'ai toujours comme expéditeur postmaster@serveur2.letxxx.org

En plus du forum phpBB, j'ai plein d'autres pages qui utilisent la fonction mail() (par exemple Wordpress, et d'autres fonctions à moi), et tous font la même chose, à savoir ne pas mettre comme expéditeur le nom complet.

J'ai trouvé une erreur dans le fichier /etc/mail/postfixadmin/vacation.conf
Il contenait l'ancien nom du serveur mais je viens de corriger.

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 01-02-2016 23:55 
Hors ligne
Blademaster

Enregistré le : 22-01-2016 17:33
Messages : 17
Alors ça devient très bizarre cette histoire. Si ça le fait sur plusieurs de tes sites, alors ça doit venir du fonctionnement de la fonction "mail()" de PHP, mais où ça ? Est-ce que tu ne voies pas d'autres paramètres "sendmail_from" quelque part dans ton php.ini, ou bien dans un fichier .htaccess, ou bien dans la configuration apache (sites-enabled par exemple) ?


Haut
   
Message non luPosté : 02-02-2016 23:38 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
J'ai demandé de l'aide ici : https://forum.ovh.com/showthread.php/10 ... Root-email
J'espère que quelqu'un sera en mesure de m'aider.

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 03-02-2016 09:51 
Hors ligne
Blademaster

Enregistré le : 22-01-2016 17:33
Messages : 17
Tu n'as pas demandé pour le souci de domaine manquant sur la fonction mail() de PHP ?


Haut
   
Message non luPosté : 03-02-2016 11:28 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Si, mais j'ai fait un sujet à part pour cela. Cet autre sujet n'est pas apparu sur le forum OVH pour une raison que j'ignore. Si ce soir je ne le vois pas, j'en ferai un nouveau.
Je préfère créer un sujet par problème car d'expérience je sais que sinon, il n'y a pas de réponse. Dès que le sujet sera en ligne sur le forum d'OVH, je donnerai le lien ici.

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 03-02-2016 21:23 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Mon message posté hier a fini par apparaître : https://forum.ovh.com/showthread.php/10 ... ed-address
J'espère que quelqu'un pourra m'apporter son aide.

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 04-02-2016 17:14 
Hors ligne
Blademaster

Enregistré le : 22-01-2016 17:33
Messages : 17
Hello,

J'ai installé une Release 3 sur un dédié OVH à moi, je vais essayer de bidouiller avec et espérer obtenir le même comportement...

Edit : bon, alors après avoir galéré pour essayer de faire fonctionner ça (le webmin je ne m'y retrouve pas du tout, j'ai même pas les modules postfix et tout...) ça envoie correctement les mails depuis la console et aussi depuis PHP. Je sais pas comment je pourrais faire pour tester au plus près de ta config.

Yann


Haut
   
Message non luPosté : 05-02-2016 23:33 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
C'est super sympa de ta part d'avoir installé une release 3 pour m'aider !

De mon côté, je peux te proposer de t'envoyer les fichiers dont tu aurais besoin pour faire tes tests. Je peux également te faire des captures d'écrans.

Je peux aussi te proposer de laisser prendre le contrôle avec TeamViewer de mon ordi pour regarder directement les fichiers du serveur.

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 05-02-2016 23:45 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
J'ai regardé mes anciens mails.

C'est à la toute fin de l'année 2014 que j'ai changé de serveur et que je suis passé de la Release 2 d'OVH à la Release 3.

Entête avec la Release 2
Return-Path: <anonymous@ks396118.kimsufi.com>
Delivered-To: fred@lankhor.net
Received: (qmail 19984 invoked by uid 1006); 30 Dec 2014 18:26:07 -0000
Message-ID: <20141230182607.19983.qmail@ks396118.kimsufi.com>
To: fred@lankhor.net
Subject: Mauvais lien sur site lankhor
From: fred@lankhor.net
Cc:
Reply-To: fred@lankhor.net
X-Mailer: PHP/5.2.13-pl1-gentoo
Date: Tue, 30 Dec 2014 19:26:07 -0600



Entête avec la Release 3
Return-Path: <lankhor>
Delivered-To: fred@lankhor.net
Received: by serveur2.letxxx.org (Postfix, from userid 504)
id A25DE27DB9; Tue, 30 Dec 2014 23:52:19 +0100 (CET)
To: fred@lankhor.net
Subject: Mauvais lien sur site lankhor
X-PHP-Originating-Script: 504:erreur404.php
From: fred@lankhor.net
Cc:
Reply-To: fred@lankhor.net
X-Mailer: PHP/5.3.3
Date: Tue, 30 Dec 2014 23:52:19 -0600
Message-Id: <20141230225219.A25DE27DB9@serveur2.letxxx.org>


Autrement dit, c'est problème d'envoi des mails date du tout premier jour d'utilisation du serveur.
Je précise que bien évidemment, le script PHP du mail est exactement le même, c'est uniquement la configuration du serveur qui a changé.

Voici un exemple de mail envoyé par le forum :
Return-Path: <abandonw>
Delivered-To: fred@lankhor.net
Received: by serveur2.letxxx.org (Postfix, from userid 507)
id 4AE7927DB7; Fri, 2 Jan 2015 22:36:07 +0100 (CET)
To: =?UTF-8?B?RnJlZG9fTA==?= <fred@lankhor.net>
Subject: =?UTF-8?B?Tm90aWZpY2F0aW9uIGRlIHLDqXBvbnNlIMOgIHVuIHN1amV0IC0gwqsgVW4g?= =?UTF-8?B?cGV1IGQnaHVtb3VyIMK7?=
X-PHP-Originating-Script: 507:functions_messenger.php
From: "=?UTF-8?B?RnJlZG9fTCAoQWJhbmRvbndhcmUp?=" <fred@lankhor.net>
Reply-To: "=?UTF-8?B?RnJlZG9fTCAoQWJhbmRvbndhcmUp?=" <fred@lankhor.net>
Sender: <fred@lankhor.net>
MIME-Version: 1.0
Message-ID: <3c626efc69293f6ccd41807976a00644@forum.abandonware.org>
Date: Fri, 02 Jan 2015 22:36:05 +0100
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
X-Priority: 3
X-MSMail-Priority: Normal
X-Mailer: phpBB3
X-MimeOLE: phpBB3
X-phpBB-Origin: phpbb://forum.abandonware.org

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Message non luPosté : 06-02-2016 22:45 
Hors ligne
Scientifique dans l'âme !
Avatar du membre

Enregistré le : 26-12-2001 13:02
Messages : 6457
Localisation : Paris
Si tu as la release 3, tu vas peut être pouvoir m'aider pour l'histoire de l'adresse mail par défaut.
Si tu utilises la commande echo test | mail -s test adresse@detest.com, cela doit envoyer un mail depuis postmaster@ton-serveur.
Si tu souhaites changer cette adresse par défaut, as-tu une idée de où il faut agir ?

_________________
Lankhor.net
Abandonware-magazines.org - Abandonware-definition.org - Abandonware-videos.org


Haut
   
Afficher les messages postés depuis :  Trier par  
Poster un nouveau sujet  Répondre au sujet  [ 33 messages ]  Aller à la page 1 2 Suivante

Heures au format UTC+02:00


Qui est en ligne

Utilisateurs parcourant ce forum : Aucun utilisateur enregistré et 3 invités


Vous ne pouvez pas poster de nouveaux sujets
Vous ne pouvez pas répondre aux sujets
Vous ne pouvez pas modifier vos messages
Vous ne pouvez pas supprimer vos messages
Vous ne pouvez pas joindre des fichiers

Rechercher :
Aller à :  
Développé par phpBB® Forum Software © phpBB Limited
Traduit par phpBB-fr.com